نام کاربری یا پست الکترونیکی
رمز عبور

Untitled 1

Abstract:

In this work crack initiation at elliptical holes in plates under uniaxial tension is studied by means of a closed form analytical Finite Fracture Mechanics approach. To allow for a detailed study of crack initi-ation, stress intensity factors available in literature are discussed and compared to extensive numerical results. Based on physical rationale, an improved stress intensity factor solution is proposed that shows a very good agreement with numerical results for a wide range of stress concentration factors of the ellipse and crack lengths. Using the exact solution of the stress field in the notched plate and the proposed stress intensity factor, an efficient Finite Fracture Mechanics solution is obtained. No empiric length parameters are introduced but only the strength and the fracture toughness are required for evaluation. The analysis comprises the case of a circular hole and the limiting cases of a crack tangential and normal to the loading direction. Typical notch size effects are covered by this coupled stress and energy approach. A continuous transition from strength of materials to Linear Elastic Fracture Mechanics can be rendered.

Authors:

P. Weißgraeber*, J. Felger, D. Geipel, W. Becker

Keywords:

Finite Fracture Mechanics Stress intensity factor Size effect

 

 

زلذبلاذ

دپارتمان های علمی

درباره کنسرسیوم

پنل آموزشی

آمار سایت

تعداد اعضای آنلاین : 0

تعداد کل اعضای کنسرسیوم : 1750

برای مشاهده اعضای آنلاین کلیک کنید

مراکز خدماتی و رفاهی طرف قرارداد

marakez

اختراع استیو لارسون گرامیداشت روز درخت کاری کمبود قطعات اسپکتروسکوپی کلاس نرم افزار داروخانه در ارومیه روشهای توليد تجهيزات پزشكی کنترل کیفی اتوکلاو اینسترومنت ها بازاریابی دوره های تزریقات پرینترهای سه بعدی نقاط دسترسی و کنترل کننده (Access Point) تومور نخاع کلیه ها آموزشگاه طب سنتی آموزش طب سنتی در شیراز ساخت تجهیزات بازرسی واقعیت PT دوره های کمک های اولیه در تبریز کالیبراسیون مایعات بدن پروژه کلاس آموزش نسخه الکترونیک در تبریز دیویلوپر خاص مراکز آموزش برنامه نویسی در تبریز ساختمان فلیم فتومتر لوله شخصیت پیکومولار تا نانومولار بازرسی استراکچر اکسیژن ساز خانگی biomedical engineering ، مهندسی پزشکی ، آشنایی با مهندسی پزشکی ، معرفی مهندسی پزشکی ، مهندسی پزشکی گرایش بالینی ، مهندسی پزشکی گرایش بیومکانیک ، مهندسی پزشکی گرایش بیوالکتریک ، مهندسی پزشکی گرایش بیوم مهندسی معکوس عطاری تجهیزات و ملزومات پزشكی شب‌های مقدس اوتیسم متحد تجهیزات پزشکی در تبریز خونگیری ژنتیک مولکولی دوره های آموزشی اکسیژن درمانی روز جهانی خانواده تهيه و تأمين خون کنتر کیفیت بازرسی CNG گامي در جهت کيفيت تشخيص چدن خاکستری سیكلوترون دوره کارشناسی ارشد MBA آموزش دستیاری دندانپزشکی سی تی اسکن های نسل چهارم مقاله اندازه گیری فشار خون دندان نیش نگهداری از اتوکلاو مهندسی پزشکی گرایش بیومتریال هنری الكساندر

logo Cracks at elliptical holes: Stress intensity factor and Finite Fracture Mechanics solution

حامیان کنسرسیوم ایرکاس

  • IRSME
  • RKA
  • ACS
  • IUE
  • RFTC
  • BQC
  • DNW
  • ICS
  • TUV-EMB
  • QAL
  • Ino
  • Allaiance
  • Tckit

تبلیغات در ایرکاس

دسترسی به ژورنال مقالات

az3

تصاویر اینستاگرام ایرکاس